Check Our Releases

Enhancements:

• We have made our core algorithms 2x faster now (a result of a water cooler conversation - call it a benefit of working from the office!). You can get the measurements in almost half of the time you used to get it!

• Right Orbital Point [ID: 215]
• Left Orbital Point [ID: 216]

Fixes:

• Fixed multiple girth identification in the torso region in scans with hands close to the body
• Fixed girths erroneously penetrating the mesh of some scans  

Enhancements:

• Added support for exporting HTML file

Fixes:

• Fixed reference points not getting inserted for some models in Girth Profiling.
• Fixed leader lines getting truncated on the split operation of Girth profiling operation. 
• Fixed Girth profile buttons remaining enabled even with no reference point inserted

• Right Waist to Knee (ID: 349) 
• Left Waist to Knee (ID: 350) 
• Right Diagonal Trunk Length (ID: 351) 
• Left Diagonal Trunk Length (ID: 352) 
• Centre Trunk Length (ID: 353)

Enhancements:

• Left Side Neck Point To Waist Level (ID: 315)  
• Right Side Neck Point To Waist Level (ID: 316)
• Back Neck Point To Waist Level Left (ID: 319) 
• Back Neck Point To Waist Level Right (ID: 320)

Fixes:

• Fixed gizmo control not orienting in sync with mouse control movement 
• Fixed setting views in gizmo to handle the zoom fit also
• Fixed Girth Profile UI interfering with Gizmo control
• Fixed setting pop-up overlaps with gizmo view
• Fixed “All measurements saved” pop-up comes even after no measurements are saved.

• Fixed retry logic for fetching ML response

• Added new gizmo controls to easily change the view.

Enhancements:

• Left Shoulder Outer Point (ID:239)
• Right Shoulder Outer Point (ID:240)
• Left Upper Arm Point (ID:241)
• Right Upper Arm Point (ID:242)
• Head Girth(ID:169) 
• Head Girth Contoured (ID:1169) 

Fixes:

• Fixed issue of gizmo control not orienting in sync with mouse control movement 
• Fixed issue of setting views in gizmo now handles the zoom fit also
• Fixed issue of Girth Profile UI interfering with Gizmo control
• Fixed issue of setting pop-up overlaps with gizmo view
• Fixed issue of “All measurements saved” pop-up comes even after no measurements are saved.

• Fixed issue of gizmo control not orienting in sync with mouse control movement 
• Fixed issue of setting views in gizmo now handles the zoom fit also
• Fixed issue of Girth Profile UI interfering with Gizmo control
• Fixed issue of setting pop-up overlaps with gizmo view
• Fixed issue of “All measurements saved” pop-up comes even after no measurements are saved.

• Fixed retry logic for fetching ML response

• Fixed retry logic for fetching ML response

Web API

Introducing API versioning:

3D Measure UP Web API integration has become easier with the introduction of API versioning for the 3D Measure Up API. API versioning enables developers to run production loads on an earlier version while they continue to integrate the latest releases. For more information write to 3dmeasureup@prototechsolutions.com.

Enhancements:

Improved accuracy

• Belly Button (ID: 237)
• Abdomen Point (ID:238)
• Waist Circumference (ID: 163)
• Navel Gith (ID:168)
• High Hip (ID:156)
• Maximum Hip (ID:166)
• Hip (ID:167)
• Total Crotch Length (ID:307)

Fixes:

Fixed deviation in measurements due to stray girths in scans with fused arm and torso. FIxed deviation in measurement when only measurements for metric ids are requested.

A new utility application for 3D Measure Up users and developers. This application makes it easy to browse, search and filter the definitions of human body measurements supported by 3D Measure Up with illustrations.

Web API

The Web API now has an option to export the measurements along with the 3D view of the avatar. This 3D HTML can be viewed in any browser or embedded in any web page and does not require internet connection.

Enhancements:

Improved accuracy

• Belly Button (ID: 237)
• Abdomen Point (ID:238)
• Waist Circumference (ID: 163)
• Navel Gith (ID:168)
• High Hip (ID:156)
• Maximum Hip (ID:166)
• Hip (ID:167)
• Total Crotch Length (ID:307)

Implemented a multi-layered regression test system early in the development process to detect unintended changes in measurements.

Fixes:

Fixed issue of extra measurements returned in Measure API response in addition to the ones requested using the "ids" parameter.

New Landmarks

• Landmark at the navel.
  1. Belly Button (ID: 237) 
• Landmark, ~2 inches above the navel.
  1. Abdomen Point (ID: 238) 

• Maximum Girth on the Forearm
  1. Left Forearm Maximum Girth (ID: 151) 
  2. Right Forearm Maximum Girth (ID: 152) 
• Girth on the Thigh 2 inches below the Crotch Point
  1. Left Upper Thigh (ID: 153) 
  2. Right Upper Thigh (ID: 154) 
• Horizontal circumference taken at the narrowest torso point between the chest and hips when viewed from the front.
  1. Narrow Waist (ID: 155) 
• Tape measure circumference at the average of the seat circumference tape measure height and the front abdomen landmark (~2 inches above the navel).
  1. High Hip (ID: 156)
• Circumference at the averaged height of both knee caps.. 
  1. Right Knee Leveled (ID: 157) 
  2. Left Knee Leveled (ID: 158) 
• Circumference taken at the averaged height of both ankle bones
  1. Right Ankle Leveled (ID: 159) 
  2. Left Ankle Leveled (ID: 160) 
• Narrowest circumference between the higher of the two elbow heights of the body and the belly button/navel
  1. Abdomen (ID: 161) 
• The narrowest circumference between the average of the elbow heights down to 2 inches below that point.
  1. High Waist (ID: 162) 
• Waist Circumference is considered to be the waistband, a fixed circumference starting at the Small of the Back point and descending at a fixed 10 degree angle to the front point.
  1. Waist Circumference (ID: 163) 
• Maximum girth on the biceps 
  1. Left Biceps Maximum Girth (ID: 164) 
  2. Right Biceps Maximum Girth (ID: 165) 
• Maximum horizontal girth of the body below the hip level
  1. Maximum Hip (ID: 166) 
• Girth at the Hip level ie Level of the greatest projection at the back of the body. 
  1. Hip (ID: 167) 
• Navel Girth (ID: 168) : Horizontal Girth Passing through Belly Button.

• Across Back Tape Measurement (ID: 345) 
• Horizontal tape measurement between the armpits, along the back
  1. Back Shoulder Width Horizontal (ID: 346) 
• Sleeve length or Tape measurement between the Back neck point and the wrist Point. The tape passes from the back neck point, shoulder point, elbow up to the wrist.
  1. Back Neck Point to Left Wrist Length (ID: 347) 
  2. Back Neck Point to Right Wrist Length (ID: 348)

• Increased digits after decimal point of Girths returned in API response from 2 to 6.
• Removed confidence and girthConfidence parameter from API response.
• Added specific status messages in status division for different features in the application.

• Crotch Point (ID: 236) 
• Left Armpit Front Fold Point (ID: 228)
• Right Armpit Front Fold Point (ID: 229) 
• Left Armpit Back Fold Point (ID: 230) 
• Right Armpit Back Fold Point (ID: 231) 
• Back Neck Point (ID: 219) 

• Crotch (ID: 110) 
• Right Mid Thigh (ID: 112) 
• Left Mid Thigh (ID: 111) 
• Chest (ID: 105) 
• Neck (ID: 140) 

• Right Side Pant Inseam (ID: 335) 
• Left Side Pant Inseam (ID: 336) 
• Right Side Pant Inseam Upto Ankle (ID: 343) 
• Left Side Pant Inseam Upto Ankle (ID: 344) 
• Scye Depth Length (ID: 308) 
• Back Neck Point To waist (ID: 309) 
• Back Neck Point To Left Bust Point (ID: 317) 
• Back Neck Point To Right Bust Point (ID: 318) 
• Back Neck Point To Waist Level Left (ID: 319) 
• Back Neck Point To Waist Level Right (ID: 320)
• Back Neck Point To Knee (ID: 327) 
• Back Neck Point To Ground (ID: 328)

• Web Application
  1. Fixed issue of saving response in the client cache.
  2. Fixed issue in repositioning of reference point outside the girth in the Girth Profile tool.
• Web API  
  1. Left/Right Foot length and Foot Width missing in API response.

• Added support for points array for the measurements of partial body scans.

• Improved measurements rendering performance.

• Fixed issue of auto-measurements not rendered sometimes due to inappropriate status code handling.
• Improved measure API calling continuous polling approach to avoid long waits.

• UI fixes
  1. 1. Replaced ProtoTech logo with 3D Measure Up logo.
     2. Improved icon of Measurement Controls button.
     3. Within the Girth profile feature, enabled the ending of current task on clicking the corresponding button second time for all operations.
     4. Resolved unexpected Reference Point creating in the scene within Girth Profile operations.
     5. Fixed the issue of Reference Point repositioning out of girth in profile operation.
     6. Fixed issue with Search text remains in search box when user loads the new model or clears scene.
     7. Fixed timing of the User Profile initialization.
     8. Fixed the issue in model name division for model name with multiple dots and extension in caps.

• Introduced new girth measurement that are “Aligned to the skeleton”.

• Landmark points updated :
  1. 1. Improved positioning of chin point on obese body scans.
• Girths Updated :
  1. 1. Renamed Chest End girth as Underbust.
• Surface Lengths updated :
  1. 1. Redefined Total Crotch length as a tape measurement.
     2. Added Total Crotch countered length.
• Enable webhook to report errors during measurement extraction.
• UI improvements :
  1. 1. Modified the button icon for the Clear Scene operation.
     2. Modified the Message of updating subscription plan for enabling the functionality in warning division.
     3. Made the Warning message clickable (Redirects to "3dmeasureup.com/pricing" ).
     4. Added functionality to Delete Measurement using context menu on measurement selection.
     5. Usage Tip for every operation is minimised and accessible during the operation.

• UI fixes
  • 1. Fixed the issue with Height annotation visible on exiting the current task using Esc key.
    2. Fixed the issue with the delay observed in the show - hide measurement. functionality using context menu on measurement selection.
    3. Fixed the issue in model upload for models with model Name containing multiple dots.
    4. Fixed the issue in model name division for model name with multiple dots and extension in caps.

• Tape measurements for all girths.

• Landmark points updated :
  1. 1. Improved accurate positioning of bust point.
• Girths Updated :
  1. 1. Renamed Chest End girth as Underbust.
• Surface Lengths updated :
  1. 1. Redefined Total Crotch length as a tape measurement.
     2. Added Total Crotch countered length.
• Enable webhook to report errors during measurement extraction.
• UI improvements :
  1. 1. Repositioned Search box and export button on the Model tree.
     2. Renamed landmarks node in the Model tree to POINTS.
     3. All contoured girths are hidden by default, to reduce clutter.
     4. Escape key exists current operation.

• UI fixes
  1. 1. The reloading of the model tree caused performance issues.
• Measurements
  • 1. Hip or Butt girth was not identified correctly for some models.

• Auto-detection of natural waists on all body types including obese or plus-size bodies

• Landmark points updated :
  1. Centre Point of Right Knee Cap detection improved for scans with merged knees
  2. Centre Point of Left Knee Cap detection improved for scans with merged knees
• Girths Updated :
  1. Left Knee girth measurements improved for scans with merged knees
  2. Right Knee girth measurements improved for scans with merged knees
  3. Left Biceps girth measurements improved for plus size bodies
  4. Right Biceps girth measurements improved for plus size bodies
• Surface Lengths updated :
  1. Right Side Mid Belly Hip To Ankle (ID: 341) added to support apparel use cases
  2. Left Side Mid Belly Hip To Ankle (ID: 142) added to support apparel use cases
  3. Right Side Pant Inseam Upto Ankle (ID: 343) added to support apparel use cases
  4. Left Side Pant Inseam Upto Ankle (ID: 344) added to support apparel use cases

• Improved support for Quad mesh scans

• Add custom measurements using 3D Measure Up’s OEM widget.

• Improved accuracy and support for landmarks related to partial body scans :
  1. Single Foot
  2. Single Leg
  3. Both Legs
  4. Lower Body only
• Type of the model (i.e Full body/Single Leg/Single Foot/..) is returned along with measure response in a parameter called 'bodyType'
• Information for height from the ground is shown along with the cursor for operations requiring selection on the body surface.
• Height annotation is visible along with Girth annotations for generic girths returned by 3DMU
• Automatic setting of units for foot models
• Settings button to handle settings like enable/disable height annotation

• Improved performance of Model Tree during show/hide operation
• Simplified mouse operation with selection
• Newly inserted girth is Auto selected
• Simplified Pan operation using mouse buttons, to avoid conflict with context menu
• Show tooltips for disabled buttons
• Enabled toggling of divisions during Girth Profiling

• All annotations/texts to always face the camera
• Export CSV All (to export all the measurements irrespective of whether they are selected or not)
• Added Search bar option in Model Tree
• Profile Picture of the user at the top right corner of the 3DMU WebApp
• A quick tour of features

• "Insert Auto Detected Measurements" label changed to "Auto Measure"
• "Insert Girth With Two Selection Points " label changed to "Measure Girth With Two Selection Points"
• The "+" button has the tooltip as "Measurement Controls"
• The size of the Sign-Out button is reduced
• The height of the measurements tree extended to the end of the window
• Load Model has an option to load from the local files and the model cannot be loaded from the cloud
• Message division fades away after a particular time

• Updated 3D Measure Up APIs link in the help section
• Improvement in onboarding message
• Fixed issue of 3DMU operations failing for OBJ/STL files if the file extension is in uppercase

• Added support for webhooks to connect with workflow engines like Zapier, Automate.io

• Improved UI select a girth and hide other metrics
• The web application shows the name of the model file and its type.
• Enabled faster and accurate Auto Alignment whole body with stray meshes
• Enabled faster and accurate Auto Alignment for partial scans body of the lower body
• Improved accuracy for detecting following landmarks and measurements in A, T and relaxed standing pose and stooping posture
  1. Neck girth
  2. Shoulder landmark
  3. Shoulder width
  4. Chest girth
  5. Chest end
  6. Bust girth
  7. Bust contoured girth
  8. Crotch landmark
  9. Total Crotch length
  10. Thigh, mid-thigh
  11. Pant Inseam

• Girth selection did not work on some models

• Modular OEM Architecture for quick development of branded application
• Launched 3D Measure Up new website (www.3DMeasureUp.com)

• Simplified API with integrated auto-alignment
• Added support for relaxed standing pose (arms and legs closer to the body)
• Improved customer management for a smoother engagement experience
• Improved accuracy for detecting following landmarks in any pose
  1. Shoulder
  2. Low Neck Point
  3. Front Center Chest
  4. Left and Right Bust points
  5. Belly
  6. Crotch
  7. Front Left and Right Armpit Points

• Improved accuracy of surface length measurement

• New 'Starter' plan launched which is free*!
• With following new metrics 3D Measure Up now automatically detects 116 metrics

1. Front Chest Width
2. Back Chest Width
3. Right Side Neck Point To Belly Button
4. Left Side Neck Point To Belly Button
5. Right Side Mid Belly Hip To Ground
6. Left Side Mid Belly Hip To Ground
7. Right Side Pant Inseam
8. Left Side Pant Inseam

• Improved customer management for a smoother engagement experience

• Added length as part for SurfaceMeasurements response

• Added button for 'Girth Profile' feature in the right panel containing measurement related controls.
• Added Vernier Caliper feature.
• Added vertical / horizontal / landmark snapping on CTRL / ALT / SHIFT key press.
• Added feature for auto-saving of measurements.
• Added single web api endpoint

• Fixed measurements getting flipped on the wrong side (Right/Left) for some models.
• Fixed web application getting hung for some models

• New Measurements added : - girths: [ID: 140, 141, 142, 143, 144] - landmarks: [ID: 236] - surface lengths: [ID: 308, 309, 310, 311, 312, 313, 314, 315, 316, 317, 318, 319, 320, 321, 322, 323, 324, 325, 326, 327, 328]
• Option to choose between Tight-Fit / Measuring-Tape in 'Measure On-Surface Distance' operation.
• Added 'Split' feature in 'Profile' operation of a girth.
• Export Measurements as HTML.

• Added support for partial body Measurements
• Increased Model size limit upto 50 MB.
• Improved Chest girth accuracy.
• Improved 'Insert Girth With Two Selection Points' operation by providing horizontal / vertical snapping for planes.
• Added feature to save model reference on cloud.
• Added feature to get specific measurements in 'Insert Auto-detected Measurements' by providing an array of IDs.
• Added feature to get the profile of a girth.
• New Measurements added :

• Alignment of girths now returns same type of girth (ie Tight-Fit / Measuring Tape)
• Annotations of girths are now conflict free

• • Added support for partial body Measurements
  • Increased Model size limit upto 50 MB.
  • Improved Chest girth accuracy.
  • Improved 'Insert Girth With Two Selection Points' operation by providing horizontal / vertical snapping for planes.
  • Added feature to save model reference on cloud.